Shopping centers, entertainment and amusement venues, auto dealerships, airports, seaports, and the contractors who maintain them
Whether you manage one flagship property or maintain lighting across many different clients’ sites, Dimonoff replaces all-or-nothing switching with scheduled, metered control — so a lot, a mall or a dealership stays lit exactly as much as it needs to, and no more.
I don’t want to choose between a dark lot and a high energy bill.
The easiest way to cut the bill is to switch half the lot off after hours. It also makes the property look abandoned and unsafe, and the complaints follow.
Closing time, event nights, security walk-throughs and a slow Tuesday all call for different lighting, but most systems only offer on or off.
Whether it is your own property or a dozen client sites you maintain, nobody has the staff to drive out and check every fixture by hand.
Dimming profile, tonight
Open alarms
| Node | Issue | Age |
|---|---|---|
| RME-04812 | Lamp failure | 14 min |
| RME-01197 | Power fault | 1 h 20 |
| RTM-00934 | No response | 3 h 05 |
Karl Chevrolet: no more choosing which half of the lot stays dark
A 1.3-million-square-foot dealership converted 316 fixtures to LED with Dimonoff nodes and replaced a half-the-lot-off compromise with even, scheduled dimming across the whole site.
Karl Chevrolet, the third-largest Chevrolet dealership in the United States at 1,307,815 square feet, had been shutting off half its lighting after hours to control costs, creating uneven, unsecure lighting across the lot. It converted 316 fixtures to LED with Dimonoff RME nodes instead.
Read the case studyThe RME controller mounts on existing NEMA ANSI C136.41 or Zhaga Book 18 sockets on LED fixtures from any manufacturer, and can connect into a building management system you already run — Galeries de la Capitale ties its lighting into its existing Reliable Controls BMS over BACnet rather than adding a separate dashboard.
LED conversion with controls typically cuts lighting energy by 50 to 70 percent. Dimming instead of switching off also recovers the security and image cost of an all-or-nothing schedule, at no extra energy spend.
The platform is built to be run by a small team or a maintenance partner covering many sites at once, with alerts and scheduling from one interface — the same layer a facilities manager or a subcontracted maintenance company can operate for one site or fifty.
We will show you what scheduled, metered control looks like for a site like yours — one lot or many.